Application procedure
A. Design
This is a design process as to which part of the car body surface an image should be put on and what kind of an image should be printed.
A-1 Inputting appearance of the car into the microcomputer using digital camera
A-2 Transferring an image to be printed into the micro computer from the CD-ROM or image scanner or digital camera
A-3 Synthesizing appearance of the car and an image on the microcomputer into a rendering and outputting such a rendering onto the display or printer
A-4
Showing a rendering to the client to get their approval


B. Printing
This process is to print directly the specified image onto the specified place of the car body.
B-1 Setting the car body in almost parallel in front of the printing machine
B-2 Measuring body data on a part where printing should be made
Required time : about 5 minutes if the surface is almost flat
about 20 minutes if the surface has many curves
about 10 minutes as an average

B-3 Wiping off the oil and grease from the part of car body to be printed on
Depending on its dirty condition, it will need 5-10 minutes.
B-4 Printing directly the specified image
Required time: about 40 minutes in case the size of the image is 2.5 feet in height *8.0 feet in width (20 square feet)

Required ink cost: about USD3.00



STEP ‚P

Measuring body data


STEP ‚Q

Wiping off the oil and grease


STEP ‚R

printing directly


STEP ‚S
Printed image is erasable by acetone.
You can reprint easily.