Frequently Asked Questions
Q1 -How is the marketability of the printing business done by ADP (Automobile Direct Printer)?
Q2 -Can ADP print an image larger than the frame of the printer ?
-Can ADP be applied to big buses and trucks as well ?
Q3 -How is ADP compared to adhesive backed vinyl films.?
Q4 -Do images need to be clear coated ?
Q5 -Does the color of a automobile matter ?
Q6 -What kind of image can be used as a printing file ?
Q7 -Can the file be transferred through a network ?

Q1 How about the marketability of printing business done by ADP ?
A1 Advertising on automobile bodies is a rapidly expanding market (Especially advertising by an image printing) and is much more economical in terms of cost performance (CPM) than those of other advertising medias such as; television, radio, news paper, magazine, and billboard.
ADP can print images on to automobile bodies easily at low cost.
Therefore, the printings service preformed by ADP will contribute to the increase of sales and profits of those body shops who introduced the ADP system.
ADP can be also used for the custom car market segment also, stripes, flames, names ect.


Q2 Can ADP print an image larger than the frame of the printer ?
Can ADP be applied to big buses and trucks as well ?
A2 Yes,
Our original software enables section printing up to 64 sections.
At V2.5 , 12 meter in height and 20 meter in width can be printed.


Q3 How is ADP compared to adhesive backed vinyl films?
A3
1. Consider the time savings compared to printing, laminating and installing the films, ADP is undoubtedly faster overall.
Cost of film, and UV protection films and installation costs can all be saved and consequently the profits will be increasing.

2. If your print will have a limited lifetime requirement, it is recommendable that you apply a clear coating that does not contain a hardener, this will allow you to remove all prints and return car surface to its original appearance, no gummy adhesive residue is left, something that often happens when you remove vinyl.
The other option is to not use clear coat at all, the printed image can be easily wiped off using ethyl alcohol when it is no longer needed.
Either of these operation is more easily done than peeling off adhesive backed vinyls.
3. If you would like your graphics to have long life durability, it is recommendable to use a clear coat that contains hardener, these images will never peel off from the surface, something you often see happening when vinyl gets old and brittle.

Q4 Do images need to be clear coated ?
A4 The color fastness with clear coat is over 3 years.
This clear coat treatment is normally made by hand spray gun using same method as normal body shop would use.


Q5 Does the color of a automobile matter ?
A5 We would say white is best.
If printing on different color, painting white color underneath the image makes the image more vivid.
White color can be painted either by handy spray gun or by ADP.
Spraying by hand takes less time. ADP would print at very accurate location.

Q6 What kind of image can be used as a printing file ?
A6 Anything edited in the computer can be printed.
but, the higher the resolution of the original file the better..


Q7 Can the file be transferred through an electronic network ?
A7 Yes, it only depends on the capability of the users system.